Traveler Series Watercolor Package
Traveler Series Watercolor Package
Traveler Series Watercolor Package
Traveler Series Watercolor Package
Traveler Series Watercolor Package
Traveler Series Watercolor Package
Traveler Series Watercolor Package
Traveler Series Watercolor Package
Traveler Series Watercolor Package
Traveler Series Watercolor Package
Traveler Series Watercolor Package
Traveler Series Watercolor Package
Traveler Series Watercolor Package
Traveler Series Watercolor Package

Traveler Series Watercolor Package

$163.95
/
Shipping calculated at checkout.
Only 23 items in stock!

 

Super Light and Compact – Just add paint and your adventure awaits.

Whether you are flying off to a workshop in Europe, or hiking the trails on a solo adventure, you can now bring your studio with you. Don’t let its light weight fool you though, this set up is rugged, sets up in minutes, and gives you a secure work platform.

The thoughtful design features an 8-hole retractable brush holder sized to hold the most popular watercolor brushes. Included are a built-in water pail hook, a collapsible water cup and travel palette.  When not being used outdoors, it converts to a table easel by removing the quick release plate and then screwing in the included table leg, held by a magnetic catch on the back. The easel connects easily to a standard camera mount tripod using a quick release. There is also a palette shelf which simply slips onto the legs of our tripod.

The Traveler Series is designed to take your watercolor studio into the field — everything is designed to fit compactly within the backpack so it can fit under the seat on an airplane or in the overhead compartment.  Say bye-bye to those extra baggage fees and hello to Happy Painting.

The Traveler Series Watercolor Package Includes:

Easel with Table Leg
One Hole Tripod Shelf
Watercolor Plastic Folding Palette
Collapsible Water Cup
Sunpak 2001UT Tripod
En Plein Air Pro Baggage Tag
Traveler Backpack

Total Package Weight:  8lbs./3.64kg.

Easel with Table Leg

  • Dimensions – 12.25”x 15.75” perfect for holding 1/4” sheets
  • Working surface angle can be adjusted from flat to vertical by using the pan head of the tripod.
  • Retractable 8-hole brush holder
  • Built in water pail hook
  • Quick Release Plate attached
  • Made of tough ABS Plastic
  • Fits in Traveler Backpack
  • Weight – 1.2lbs./.55kg.

One-Hole Tripod Shelf

  • Dimensions – 15.75”x 10.5”x 1”
  • No clamps or brackets – simply slips on Sunpak 2001UT Tripod
  • Collapsible Water Cup included
  • Hole Diameter for Water Cup is 3”
  • Built in hooks for trash bags
  • Shelf height from the ground is 27” when tripod is fully extended
  • Made of tough ABS Plastic
  • Fits in Traveler Backpack
  • Weight – 1.7lbs./.77kg.

Watercolor Plastic Folding Palette

  • Dimensions – 10” x 12”
  • 18 Wells for Paints
  • 5 Mixing Wells
  • The lid will keep your watercolors protected when not in use
  • Extra room to carry small tubes of paint or brushes

Sunpak 2001UT Tripod

  • Supports 4.4lb/2kg
  • Head Type – Three-Way Easy Pan & Tilt Head
  • Extra Quick Release plate included
  • Load Capacity – 4.4lb/2kg
  • Maximum Working Height – 48.9”/124.2 cm
  • Minimum Working Height – 17.9”/45.5 cm
  • Folded Length – 19.7”/50cm
  • Materials – Aluminum Alloy
  • Leg Lock Type – Flip Lock
  • Independent Leg Spread – No
  • Leg Sections – 3 Telescoping legs are easily adjustable for standing or sitting while painting
  • Center Column Features – Center Brace
  • Center Column Extension Type – Rapid
  • Fits in Traveler Backpack
  • Weight 2.3lb./1.1kg

Traveler Backpack

  • Oversized Backpack
  • Extra Large Main Compartment
  • One front zippered organizer pocket for easy access
  • Another front zippered pocket for supplies
  • A side zippered pocket and a side mesh pocket
  • Multiple compression straps for stability and comfort
  • Fabric – 600D Polyester
  • Dimensions 20” x 13.5” x 8”
  • Capacity – 1830 cu in/30L
  • En Plein Air Pro Baggage Tag included
  • Weight – 2.8lbs./1.1kg
  • HOLDS ALL TRAVELER SERIES ITEMS
Unpack your new Easel System inside the backpack.
  1. Start with the tripod
  2. Using the fliplocks extend the legs of the tripod to your desired height
  3. Once extended lock the legs into place with the fliplocks
  4. Next, take the black easel and look on the back for the quick release plate that is already screwed into the square block (don't unscrew or remove this plate)
  5. Then, look at the top of the tripod and locate the pan head that this plate fits into
  6. Pull down the black lever on the left side of this pan head and insert the quick release plate
  7. Push the lever back up into place to secure the easel to the tripod
  8. Next, take the tripod tray and slip it onto the legs of the tripod
  9. Lay the palette on the tray and insert the water cup in the hole
  10. Add your canvas, brushes and paints and ENJOY!

NOTE: To use the easel on a table top surface:

  1. Remove the easel from the tripod. 
  2. Unscrew the quick release plate on the back of the easel and put it into the pan head of the tripod for safe keeping.
  3. Detach the table leg from the magnet on the back of the easel. (The table leg looks like a long screw with a black cap on the end.) 
  4. Screw the table leg into the block on the back of the easel. 
  5. Enjoy your table top easel! 

 

reviews



Related Products

Quick view
Advanced Series Watercolor Package
$179.95
Quick view
Advanced Series Oil & Acrylic Package
$267.95
Sold Out
Professional Series Oil & Acrylic Package
from $327.95
Quick view
Pastel Package Coming This Fall!
$0.00
Advanced Series Watercolor Package
Advanced Series Watercolor Package
Advanced Series Watercolor Package
Advanced Series Watercolor Package
Advanced Series Watercolor Package
Advanced Series Watercolor Package
Advanced Series Watercolor Package
Advanced Series Watercolor Package
Advanced Series Watercolor Package
Advanced Series Watercolor Package
Advanced Series Watercolor Package
Advanced Series Watercolor Package
Advanced Series Watercolor Package
Advanced Series Watercolor Package
Advanced Series Watercolor Package
Advanced Series Watercolor Package

Advanced Series Watercolor Package

$179.95
/
Shipping calculated at checkout.

This Package is lightweight, portable and assembles in minutes! Imagine where you can go...

For the watercolorist we offer the Advanced Series Package which features our exclusive watercolor palette shelf with cover. Unlike other lightweight plastic palettes on the market that quickly become brittle with use, our Advanced Series Watercolor palette is made of heavy-duty ABS thermoformed material (not brittle styrene plastic). The palette comes with a grey 3mm PVC cover for easy transport to and from the field.

This design offers convenient and thoughtful features such as a retractable 8-hole brush holder sized to hold the most popular watercolor brushes. Included are a built-in water pail hook, a collapsible water pot and watercolor palette shelf with cover.  When not being used outdoors it converts to a table easel by removing the quick release plate and then screwing in the included table leg, held by a magnetic catch on the back. The easel connects easily to a standard camera mount tripod using a quick release. The palette shelf with cover simply slips onto the legs of our tripod.

The Advanced Watercolor Series is designed to take your watercolor studio into the field — everything is designed to fit compactly within the carry-all bag in the overhead compartment on the airplane.  Say bye-bye to those extra baggage fees and hello to Happy Painting.

The Advanced Series Watercolor Package Includes:
Easel with Table Leg
Watercolor Palette Shelf with Cover
Collapsible Water Pot
Slik U8000 Tripod
Carry-All Embroidered En Plein Air Pro Duffel Style Bag

Total Package Weight:  8.5lbs./3.86kg.

 Easel with Table Leg

  • Dimensions – 12.25”x 15.75” perfect for holding 1/4” sheets
  • Working surface angle can be adjusted from flat to vertical by using the pan head of the tripod
  • Retractable 8-hole brush holder
  • Built-in water pail hook
  • Quick Release Plate attached on the back
  • Table leg included – magnetic catch on the back
  • Made of tough ABS PlasticFits in Carry-All Bag
  • Weight –   1.2lbs./.55kg.

Watercolor Palette Shelf with Cover

  • Dimensions – 11.5” x 16” x 3mm
  • 14 Genereous size paint wells
  • 2 Large mixing reservoirs
  • No clamps or brackets – simply slips on Slik U8000 Tripod
  • Collapsible Water Pail included
  • Hole Diameter for Water Pot – 3”
  • Built in hooks for trash bags
  • Shelf height from the ground is 35” when tripod is fully extended
  • Palette is made of tough ABS Plastic
  • Cover is made of  PVC
  • Fits in Carry-All Bag
  • Weight –   1.7lbs./.77kg.
Slik U8000 Tripod
  • Supports 4.5lb
  • Head Type – Pan & Tilt Head with one hand operation
  • Camera Mounting Screw – 1/4” - 20 male
  • Quick Release Plate Included
  • Load Capacity – 4.5lb/2kg
  • Maximum Working Height – 59”/149.9 cm
  • Minimum Working Height – 22”/55.9 cm
  • Folded Length – 23.2”/58.9 cm
  • Materials – Aluminum Alloy
  • Leg Lock Type – Flip Lock
  • Independent Leg Spread – No
  • Leg Sections – 3 telescoping legs including rubber feet are easily adjustable for standing or sitting while painting
  • Center Column Sections – 1
  • Center Column Extension Type – Geared
  • Later/90-Degree Center Column – No
  • Fits in Carry-All Bag
  • Weight 3.3lb./1.5kg

Carry-All Bag

  • Expandable Carry-All Duffel Style Bag with En Plein Air Pro
  • Embroidered Logo – includes hidden backpack shoulder straps that convert bag into backpack
  • Main Compartment with two-way zippered closure
  • Front zippered pocket with two-way zippered closure
  • Two Side zippered pockets for supplies
  • D-Ring attachment on front
  • Zippered bottom panel for quick access to hidden adjustable backpack shoulder straps
  • Dual carrying handles with hook and loop closure
  • Adjustable and removable shoulder strap
  • Fabric – 600D Polyester/420D ripstop nylon
  • Dimensions 25” x 13” x 12”
  • Weight – 2.3lbs./1kg
  • HOLDS ALL TRAVELER SERIES ITEMS
Unpack your gear.
  1. Start with the tripod
  2. Using the fliplocks extend the legs of the tripod to your desired height
  3. Once extended lock the legs into place with the fliplocks
  4. Crank the center column up to the desired height.  Turn the center locking collar to a snug position to hold the column in place
  5. Next, take the black easel and look on the back for the quick release plate that is already screwed into the square block (don't unscrew or remove this plate)
  6. Then, look at the top of the tripod and locate the pan head that this plate fits into
  7. Pull down the grey lever on the left side of this pan head and insert the quick release plate
  8. Push the lever back up into place to secure the easel to the tripod
  9. Next, take the palette and slip it onto the legs of the tripod
  10. Remove the grey palette cover, flip it over and slide it underneath the palette
  11. Hang the waterpot in the hole at the back of the palette on the built in hooks 
  12. Add your canvas, brushes and paints and ENJOY!

NOTE: To use the easel on a tabletop surface:

  1. Remove the easel from the tripod. 
  2. Unscrew the quick release plate on the back of the easel and put it into the pan head of the tripod for safe keeping.
  3. Detach the table leg from the magnet on the back of the easel. (The table leg looks like a long screw with a black cap on the end.) 
  4. Screw the table leg into the block on the back of the easel. 
  5. Enjoy your tabletop easel! 

reviews

Advanced Series Oil & Acrylic Package
Advanced Series Oil & Acrylic Package
Advanced Series Oil & Acrylic Package
Advanced Series Oil & Acrylic Package
Advanced Series Oil & Acrylic Package
Advanced Series Oil & Acrylic Package
Advanced Series Oil & Acrylic Package
Advanced Series Oil & Acrylic Package
Advanced Series Oil & Acrylic Package
Advanced Series Oil & Acrylic Package
Advanced Series Oil & Acrylic Package
Advanced Series Oil & Acrylic Package
Advanced Series Oil & Acrylic Package
Advanced Series Oil & Acrylic Package

Advanced Series Oil & Acrylic Package

$267.95
/
Shipping calculated at checkout.

"Whether you are exploring the back country of America or the back roads of Europe, this lightweight 'Oil and Acrylic Easel System' will meet the needs of the most adventurous painter." -
Eric Michaels, NWS, OPA & PSA 

The En Plein Air Pro Advanced Series Oil & Acrylic Package, with our new Pro Series Panel Holder, handles canvas panels or stretched canvas up to 22” tall or down to 6” x 8” (the most popular range for outdoor painting). The panel holder is a structural aluminum channel with ABS brackets. Max height to center of panel or canvas is 58″.  Our vertical mounting design eliminates the “top heavy rocking” that can occur in other tripod/pochade box set-ups.

The Advanced Series Oil and Acrylic Palette is lightweight, functional, and truly unique. Our Palette Frame features a 6-hole brush holder. At 15.25” x 9.5”, this palette offers over 144 sq. in. of mixing area. The working surface is a clear 1/8″ abrasion resistant layer which resists scratching and cleans up with a supplied squeegee and paper towel moistened with turps. Underneath is a neutral gray background with value scale. The thoughtful design incorporates a grey PVC slide on cover that allows transport of wet paint to and from the field. On location, flip the cover over and slide underneath, and you have an extra shelf with a 3″ hole for the PETG plastic lock-tight turps jar. The maximum height from the ground to top of palette is 35″. 

The Slide-out Side Shelf is our newest innovation. Made of 6mm grey PVC, this shelf is the perfect place to lay your palette knife or your ‘thumbnail sketch’, or cups for painting mediums, oil, etc. The Shelf will fit on either side of palette and has extra holes for brushes. Included is a “clothespin” clamp to be placed on the tripod leg-opposite of the sliding shelf.

The Advanced Series Oil & Package Includes:
Oil & Acrylic Palette with Cover and Sliding Shelf
Pro Series Panel Holder
7oz. Turps Jar
Slik U8000 Tripod
Squeegee
4” Spring Clamp
60L Heavy Duty En Plein Air Pro Embroidered Cordura Convertible Backpack with Hideaway Shoulder Straps

Total Package Weight:  10.7lbs./4.86kg

Oil & Acrylic Palette with Cover and Slide Out Shelf

  • Dimensions – 15.25” x 9.5”
  • 144 square inches of mixing area
  • Working surface is a 1/8” layer of clear abrasion resistant acrylic
  • Underneath the acrylic surface is a built-in value scale
  • No clamps or brackets – simply slips on our Slik U8000 Tripod or any tripod with a leg diameter of 7/8” - 1 1/8”
  • 7 oz. Lock-tight Turps Jar with butyl rubber gasket – made of PETG Plastic (not glass) included in the package
  • NOTE:  We recommend emptying the Turps Jar every 4 days.  If left any longer, over time it might swell the gasket and cause leakage.
  • Hole Diameter for Turps Jar – 3”
  • Palette height from the ground is 35” when tripod is fully extended
  • NOTE: Palettte height may differ slightly with tripods other than the Slik U8000 included
  • Palette frame is constructed of ABS Plastic
  • Palette Slide-out Shelf has 6 holes for brushes and is made of tough PVC and can be positioned on either side of the palette
  • Palette Cover is made of ABS Plastic
  • Fits in Heavy Duty 60L Backpack
  • Weight –   2.8lbs./1.27kg.

Panel Holder

  • Structural aluminum channel with 2 ABS brackets
  • Panel Holder Dimensions - 24" tall x 1 1/2" wide
  • ABS Bracket - 8" long x 1" wide 
  • Equipped with a 1/4”, 20 thread mount
  • Stable Work Surface - eliminates “top heavy rocking”
  • Holds panels or stretched canvas up to 22” vertically
  • Holds small 6x8 panels as well
  • Vertical mounting design eliminates the “top heavy rocking” that can occur in other tripod/pochade box set-ups
  • Attaches easily to tripod with a quick release plate
  • Doubles as a single wet painting carrier when finished
  • Height from the ground to the top of panel holder or canvas is 72”
  • Fits in Heavy Duty 60L Backpack
  • Weight – 1.3lbs./.60kg.

  Slik U8000 Tripod

  • Supports 4.5lb
  • Head Type – Pan & Tilt Head with one hand operation
  • Camera Mounting Screw – 1/4” - 20 male
  • Quick Release Plate included
  • Load Capacity – 4.5lb/2kg
  • Maximum Working Height – 59”/149.9 cm
  • Minimum Working Height – 22”/55.9 cm
  • Folded Length – 23.2”/58.9 cm
  • Materials – Aluminum Alloy
  • Leg Lock Type – Flip Lock
  • Independent Leg Spread – No
  • Leg Sections – 3 telescoping legs including rubber feet are easily adjustable for standing or sitting while painting
  • Center Column Sections – 1
  • Center Column Extension Type – Geared
  • Fits in Heavy Duty 60L Backpack
  • Weight 3.3lb./1.5kg

60L Heavy Duty Convertible Backpack

  • High Strength Oxford Canvas Fabric – ultra tough & durable with      En Plein Air Pro Embroidered Logo
  • Side zipper gives easy access to large main compartment
  • Two front zippered pockets for paints, brush roll, sketchbook, etc.
  • Zippered back panel hides backpack straps & waist belt
  • Padded shoulder straps and waist belt convert bag into backpack
  • Three heavy duty handles (top, bottom, side) allows backpack to be carried like a suitcase
  • Exterior loops to clip on extra gear like water bottle, umbrella bag, etc.
  • Dimensions 26” x 12.20” x 10.63”
  • Capacity - 60L
  • Weight – 3.3lbs./1.5kg

HOLDS ALL ADVANCED OIL & ACRYLIC PACKAGE ITEMS

Unpack your gear.

  1. Start with the tripod
  2. Using the fliplocks extend the legs of the tripod to your desired height
  3. Once extended lock the legs into place with the fliplocks
  4. Crank the center column up to the desired height.  Turn the center locking collar to a snug position to hold the column in place
  5. Next, take the Panel Holder and look for the quick release plate that is already screwed onto the aluminum channel (don't unscrew or remove this plate)
  6. Then, look at the top of the tripod and locate the pan head that this plate fits into
  7. Pull down the grey lever on the left side of this pan head and insert the quick release plate
  8. Push the lever back up into place to secure the easel to the tripod
  9. Next, take the palette and slip it onto the legs of the tripod
  10. Lift the tab at the back of the palette cover and slide it off, then flip the cover over and slide it back underneath the         palette
  11. Pull out the sliding shelf approximately 6” (you can position the shelf on either side of the palette).  Attach the spring clamp to the tripod leg above the palette.  Make sure the clamp is on the leg - opposite side of the shelf
  12. Open the turps jar lid and position the jar in the 3” hole
  13. Adjust the panel holder brackets 90 degrees by loosening the star knobs.  Adjust the height of the brackets to fit your panel. Place your panel in the brackets and tighten the star knobs to ensure a snug fit. 
  14. Add your brushes and paints and ENJOY!      

reviews



Professional Series Oil & Acrylic Package
Professional Series Oil & Acrylic Package
Professional Series Oil & Acrylic Package
Professional Series Oil & Acrylic Package
Professional Series Oil & Acrylic Package
Professional Series Oil & Acrylic Package
Professional Series Oil & Acrylic Package
Professional Series Oil & Acrylic Package
Professional Series Oil & Acrylic Package
Professional Series Oil & Acrylic Package
Professional Series Oil & Acrylic Package
Professional Series Oil & Acrylic Package
Professional Series Oil & Acrylic Package
Professional Series Oil & Acrylic Package
Professional Series Oil & Acrylic Package
Professional Series Oil & Acrylic Package

Professional Series Oil & Acrylic Package

$327.95
/
Shipping calculated at checkout.

Perfect for outdoors, workshops and classes. So easy, so convenient... just set up and paint!

The En Plein Air Pro Professional Series Oil & Acrylic Package, with our new Pro Series Panel Holder is designed for painters who paint larger that 16”x 12” with stretched canvas up to 22” tall or down to 6” x 8” (the most popular range for outdoor painting). The panel holder is a structural aluminum channel with ABS brackets. It mounts on the SLIK U8000 Tripod with a quick release plate (included). We paired the panel holder with this medium duty tripod for its wide stance with increased stability. 

The Professional Series Oil and Acrylic Palette with cover comes with a 1/8” layer of abrasion resistant working surface.  Or, if you prefer, upgrade to a 1/8” layer tempered glass working surface. The working surfaces resist scratching and clean up with a supplied squeegee and paper towel moistened with turps. Underneath is a neutral gray background with value scale.  Max height to top of palette from the ground is 35″.  The maximum height from the ground to the top of the panel holder or canvas is approximately 72”.  The palette cover doubles a palette “shade” (important when comparing color values outside.)  The cover is held vertically by a retractable bungee cord. 

The palette has two slide-out shelves with 7 brush holders of different sizes on each shelf. Made of rugged ABS plastic, the shelves are the perfect place to lay your palette knife or your ‘thumbnail sketch’, or cups for painting mediums, oil, etc.  One shelf has a 3” hole for our PETG turps jar.  Included is a “clothespin” spring clamp to be placed on the tripod leg - opposite of the sliding shelf. 

The Professional Series Oil & Acrylic Package Includes:
Oil & Acrylic Palette with Cover and Two Sliding Shelves
Pro Series Panel Holder
7oz. Turps Jar
Slik U8000 Tripod
Squeegee
4” Spring Clamp
60L Heavy Duty En Plein Air Pro Embroidered Cordura Convertible Backpack with Hideaway Shoulder Straps 

Total Package Weight:  11bs./5kg. - Abrasion Resistant Surface
Total Package Weight:  12.3lbs./5.6kg. – Tempered Glass Surface

Oil & Acrylic Palette with Cover and Two Slide Out Shelves

  • Dimensions – 9” x 18.5”
  • 166 square inches of mixing area
  • Abrasion Resistant Option working surface is a 1/8” layer of clear acrylic or the  
  • Tempered Glass Option working surface is a 1/8” thick layer of TG
  •  Underneath both the Abrasion Resistsant and Tempered Glass surfaces is a built in value scale
  • No clamps or brackets – simply slips on our Slik U8000 Tripod or any tripod with a leg diameter of 7/8” - 1 1/8”
  • 7 oz. Lock-tight Turps Jar with butyl rubber gasket – made of PETG Plastic (not glass) included in the package
  • NOTE:  We recommend emptying the Turps Jar every 4 days.  If left any longer, over time it might swell the gasket and cause leakage.
  • Hole Diameter for Turps Jar – 3”
  • Palette height from the ground is 35” when tripod is fully extended
  • NOTE: Palette height may differ slightly with tripods other than the Slik U8000 included 
  • Palette frame is constructed of ABS Plastic
  • Each Palette Slide-out Shelf has 7 holes for brushes and is made of tough PVC
  • NOTE:  Shelf with turps jar hole can be switched to either side of the palette.
  • Palette Cover is made of  ABS Plastic
  • Fits in Heavy Duty 60L Backpack

Weight – 3.10lbs./1.41kg. - Abrasion Resistant Option
Weight - 4.13lbs./1.88kg. – Tempered Glass Option

Panel Holder

  • Structural aluminum channel with 2 ABS brackets
  • Panel Holder Dimensions - 24" tall x 1 1/2" wide
  • ABS Bracket - 8" long x 1" wide 
  • Equipped with a 1/4”, 20 thread mount
  • Stable Work Surface - eliminates “top heavy rocking”
  • Holds panels or stretched canvas up to 22” vertically
  • Holds small 6x8 panels as well
  • Vertical mounting design eliminates the “top heavy rocking” that can occur in other tripod/pochade box set-ups
  • Attaches easily to tripod with a quick release plate
  • Doubles as a single wet painting carrier when finished
  • Height from the ground to the top of panel holder or canvas is 72”
  • Fits in Heavy Duty 60L Backpack

Weight – 1.3lbs./.60kg.

Slik U8000 Tripod

  • Supports 4.5lb
  • Head Type – Pan & Tilt Head with one hand operation
  • Camera Mounting Screw – 1/4” - 20 male
  • Quick Release Plate included
  • Load Capacity – 4.5lb/2kg
  • Maximum Working Height – 59”/149.9 cm
  • Minimum Working Height – 22”/55.9 cm
  • Folded Length – 23.2”/58.9 cm
  • Materials – Aluminum Alloy
  • Leg Lock Type – Flip Lock
  • Independent Leg Spread – No
  • Leg Sections – 3 telescoping legs including rubber feet are easily adjustable for standing or sitting while painting
  • Center Column Sections – 1
  • Center Column Extension Type – Geared
  • Fits in Heavy Duty 60L Backpack

Weight 3.3lb./1.5kg

60L Cordura Convertible Backpack

  • High Strength Oxford Canvas Fabric – ultra tough & durable
  • Side zipper gives easy access to large main compartment
  • Two front zippered pockets for paints, brush roll, sketchbook, etc.
  • Zippered back panel hides backpack straps & waist belt
  • Padded shoulder straps and waist belt convert bag into backpack
  • Three heavy duty handles (top, bottom, side) allows backpack to be carried like a suitcase
  • Exterior loops to clip on extra gear like water bottle, umbrella bag, etc.
  • Dimensions 26” x 12.20” x 10.63”
  • Capacity – 60L

Weight – 3.3lbs./1.5kg

HOLDS ALL PROFESSIONAL SERIES OIL & ACRYLIC PACKAGE ITEMS

Unpack your gear.

  1. Start with the tripod
  2. Using the fliplocks extend the legs of the tripod to your desired height
  3. Once extended lock the legs into place with the fliplocks
  4. Crank the center column up to the desired height.  Turn the center locking collar to a snug position to hold the column in place
  5. Next, take the Panel Holder and look for the quick release plate that is already screwed onto the aluminum channel (don't unscrew or remove this plate)
  6. Then, look at the top of the tripod and locate the pan head that this plate fits into
  7. Pull down the grey lever on the left side of this pan head and insert the quick release plate
  8. Push the lever back up into place to secure the easel to the tripod
  9. Next, take the palette and slip it onto the legs of the tripod
  10. Pull out both sliding shelves approximately 6”. 
  11. Lift the cover from the palette and position it at the back of the palette against the center column of the tripod. Unhook the bungee cord from the slot on the right inside the cover. Wrap the cord over the left side of the lid and around the back of the tripod center column and reinsert the hook back into the slot on the top of the lid.
  12. Attach the spring clamp to the tripod leg above the palette. Make sure the clamp is on the leg - opposite side of the shelf containing the turps jar.
  13. Open the turps jar lid and position the jar in the 3” hole (Note:  Shelf with turps jar hole can be switched to either side of the palette.)
  14. Adjust the panel holder brackets 90 degrees by loosening the star knobs.  Adjust the height of the brackets to fit your panel. Place your panel in the brackets and tighten the star knobs to ensure a snug fit. 
  15. Add your brushes and paints and ENJOY! 

reviews



Pastel Package Coming This Fall!

Pastel Package Coming This Fall!

$0.00
/
Shipping calculated at checkout.