🖌️ How to Set Up Your Advanced Series Oil & Acrylic Package
What's Included
- Oil & Acrylic Palette with Cover and Slide-Out Shelf (15.25 x 9.5, 144 sq. in. mixing area)
- Pro Series Panel Holder
- 7oz. Turps Jar (PETG Plastic, lock-tight)
- Slik U8000 Tripod
- Squeegee
- 4 Spring Clamp
- 60L Heavy Duty En Plein Air Pro Embroidered Cordura Convertible Backpack
Total Packed Weight: 10.7 lbs / 4.86 kg
Step 1 — Unpack Your Gear
Remove all items from the 60L Convertible Backpack and lay them out on a flat surface before beginning assembly.
Step 2 — Set Up the Tripod
Open the Slik U8000 tripod and extend each leg using the flip locks. Adjust to your preferred working height — standing or seated — then lock each leg firmly in place.
Step 3 — Raise the Center Column
Crank the center column up to your desired height. Turn the center locking collar to a snug position to hold the column in place.
Step 4 — Attach the Panel Holder to the Tripod
Locate the quick release plate already screwed onto the aluminum channel of the Panel Holder. Do not unscrew or remove this plate. At the top of the tripod, find the pan head. Pull down the grey lever on the left side of the pan head, insert the quick release plate, then push the lever back up to lock the Panel Holder securely in place.
Step 5 — Install the Palette on the Tripod
Slide the Oil & Acrylic Palette onto the legs of the tripod below the Panel Holder. Position it at a comfortable working height.
Step 6 — Set Up the Palette Cover and Slide-Out Shelf
Lift the tab at the back of the palette cover and slide it off. Flip the cover over and slide it back underneath the palette — this gives you an extra surface. Pull out the slide-out shelf approximately 6 inches and position it on your preferred side of the palette. Attach the 4 spring clamp to the tripod leg on the opposite side of the shelf for counterbalance.
Step 7 — Install the Turps Jar
Open the turps jar lid and place the jar into the 3-inch hole on the palette cover shelf.
Step 8 — Adjust the Panel Holder Brackets
Loosen the star knobs on the Panel Holder brackets and rotate them 90 degrees. Adjust the bracket height to fit your panel or canvas. Place your panel in the brackets and tighten the star knobs firmly to ensure a snug, secure fit.
Step 9 — Load Up and Paint!
Add your brushes, paints, and palette knife. You're ready to paint!
💡 Pro Tip: The slide-out shelf can be positioned on either side of the palette — great for left- or right-handed painters. Always place the spring clamp on the tripod leg opposite the shelf to keep your setup balanced and stable. We recommend emptying the Turps Jar every 4 days to prevent gasket swelling.